FX1shooter

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 115 total)
  • Author
    Posts
  • in reply to: TelePrompTer software for Ipad #213955
    AvatarFX1shooter
    Member

    I use Pro Prompter on IPAD and it works great! and yes you can adjust the speed…

    good luck,
    Robert

    in reply to: Video Mixer #213865
    AvatarFX1shooter
    Member

    Take a look at the Blackmagic design Atem Switchers… they offer great flexibility at a good price.

    i have these products and they work great. yes you probably need converters to connect your cam`s to it but you would still be ending up spending less money

    Good Luck

    Robert

    in reply to: connect video cam to soundboard #213646
    AvatarFX1shooter
    Member

    as Mike said,

    it would help to know the model of your Mackie soundboard…

    is this the same sound board as what the preacher is connected to??? if it is, you will probably be stuck with a line level output as it is probably directly connected to the speakers…

    if you are using your own soundboard then…

    you need to know if you camera will accept a “line” level signal or only a “mic” level signal. usually a switch on the camera near the xlr inputs

    second, you need to know if the Mackie can output a “mic” level out some of them do I have three different models that have that capability (usually a small push button switch near XLR outputs).

    give us the model number and what is connected to it and then we will be able to help you.

    cheers,
    Robert

    in reply to: Multiple VGA’s to Single Monitor #213645
    AvatarFX1shooter
    Member

    i would recommend using the Blackmagic design television studio switcher (995$). it has everything you need and will do exactly what you are looking for!
    have a look at it and look at all the videos about it on youtube

    https://www.blackmagicdesign.com/products/atemtelevisionstudio

    good luck!

    Robert

    in reply to: Video preview delivery methods #213150
    AvatarFX1shooter
    Member

    I use my Amazon S3 account and stream the video through a password protected section of my website. that way I control every aspect of it. and its really not expensive

    regards
    Robert

    in reply to: AVCHD burned to reg. DVD and played on consumer DVD player? #212942
    AvatarFX1shooter
    Member

    have a look at Roxio Toast (Roxio.com) it does it just about automatically…

    Good luck

    Robert

    in reply to: Want to make a video on traveling! #212759
    AvatarFX1shooter
    Member

    Have a look at this….

    http://www.wikihow.com/Make-a-Good-Travel-Video

    regards,

    Robert

    in reply to: New Guy Trying to Learn- 30 or 60fps? #212758
    AvatarFX1shooter
    Member

    Jay,
    I would definitely go with the highest quality (1080) and since you are looking for a cinematic look…. 24fps since this is what is used in cinemas…

    Then the question becomes Interlaced (I) or Progressive (P)

    I looked into this recently (for streaming video) and found this article….

    http://www.videomaker.com/article/13755-choosing-your-direction-progressive-or-interlaced.

    also, I typed “Interlace vs Progressive” in google and found good articles that you should read…

    so based on your available formats you only have 1080/24P as choices…

    now FX or FH

    I would go with the FX (1080/24P FX(24Mbps) because its a higher Quality…

    Good luck with your new endeavor!

    Regards,
    Robert

    in reply to: Convert GIF to video for upload to Instagram from PC #212757
    AvatarFX1shooter
    Member

    Goldey,

    I typed “converting animated Gif to video” in Google and got this link….

    http://www.giftovideo.com

    and its free….

    have fun

    in reply to: DVD-R disc plays 7 minutes then stops #212657
    AvatarFX1shooter
    Member

    Laura,

    I have also seen disk that fail to play properly because a label was placed on the disk and cause severe vibration. as a protection the dvd readers stop when dvd’s cause to much vibration… not saying its the case but something to look at…

    i must say that I have good success with Taiyo-Yuden (burned over 4000 dvd’s and got 5 bad ones…
    I print the image on all my (water-shield) dvd’s instead of putting a label

    good luck,

    Robert

    in reply to: How to connect lights to cealing? #212656
    AvatarFX1shooter
    Member

    try this “Smith-Victor 575 – Universal to Shoe Mount Adapter” sold at B&H Photo

    and this “Impact Wall Plate with 5/8″ Baby Swivel” also sold at B&H photo.

    keep in mind that you MUST somehow SECURE the lights to the ceiling in case the hold down brakes away…

    lights stands might be a better choice for you!

    good luck

    Robert

    in reply to: DVD Maker for Mac Yosemite #212641
    AvatarFX1shooter
    Member

    I use Roxio Toast… works great !

    Good Luck!
    Robert

    in reply to: Mount softboxes to ceiling or beam? #212525
    AvatarFX1shooter
    Member

     

    Your track light will not do…

     

    Have a look at the B&H website they have all types of brakets/holders

     

    example is:http:

    //www.bhphotovideo.com/c/product/857313-REG/impact_srp_120_wall_plate_with_3_8.html

     

    good luck

    Robert

    in reply to: Creating Burning Text/Border in FCPX #212381
    AvatarFX1shooter
    Member

    in you do a search on google for:

     

    burning text after effects… you will get a multitude of how to videos….showing you haow to do it… yes you need After Effects….

     

    good luck!

    Robert

    in reply to: Steadicam vs gimbals #212380
    AvatarFX1shooter
    Member

    oops try this instead

    http://www.reduser.net/forum/showthread.php?103272-Gimbal-vs-Steadicam-Or-Both

     

Viewing 15 posts - 1 through 15 (of 115 total)

Best Products

homicide-bootstrap