I also had that problem. I

I also had that problem. I “fixed” it by adding a Nady DMP-2 between the mics & the H4n or camcorder. I must admit it adds a little circuitry hiss (an easy fix in post – well worth it) and it’s output is line level only.

It’s pre-ampwith 2XLR in & outputs, +48V phantom power& powered by one9 volt battery.

It’s small – about 4.5″WX 2.25″ HX 5.25″ D and only 1 pound.

Pricedunder $75 and easy to use.

Good luck – Jake – Torrance, CA