RAID 0 question

[dzgear]

Hey guys I finally got my remaining 2 HD’s for storage. My primary is a WD 250gig with 16mb cache. I liked it so much I bought two more for a RAID O storage setup. So I go into BIOS and configure the two discs using the intel matrix storage program and all goes fine. They are now set up as one disc with approx. 470 gigs of storage. During the reboot the problem comes when windows will not boot under any condition even safe mode. The fix is to change the IDE config. back to it’s orig. setting (I can’t remember at the moment) from the RAID setting it was supposed to be at to recognize the new storage setup. I know this may be a little confusing so if you need more info. to help clarify and get this set up fire away! Thanks in advance for your help.

[Author]

Posts