HDMI video switcher into Convergent Design Nano Flash

[egarloff]

Does anyone know if I can take the outputs of 3 Canon HV30 HD video cameras and run them into a 3 to 1 HDMI switcher, then into a Convergent Design Nano Flash recorder and end up with a signal that is not compressed,or distorted in any way from the switcher? It must have a clean switch from one camera to the other, as a regular video switcher would do.

Can you recomend a video switcher for under $1000 that will do a good clean job. (broadcast quality 1080 res. is needed for the final product).

[Author]

Posts