Mic ID block

1. nobody
   Member

   
   Hi all
   question. I cant seem to find any where to get a Microphone ID block as seen on News Reporters microphone with their Station logo on it.
   Are these easy to make or where can I get one?
   Thanx.
   D.

   Posted 8 years ago #

2. nobody
   Member

   
   You can get them From Markerteck they are in their catalogue i dont know if they are online they come in multable shapes and sizes you have to add you logo on to them(sticker) hope this helps

   Posted 8 years ago #

3. nobody
   Member

   
   Thanx Matt
   I'll take a peek.
   And I have just found out that they are officially called Mic Flags.
   Thanx again
   D.

   Posted 8 years ago #

4. nobody
   Member

   
   They are very easy to make. A mic flag is simply a plastic box turned upside down with a hole drilled in it.
   the inside of the box is stuffed with two pieces of foam, the microphone is sandwiched in between the foam, the friction keeps the flag at the top of the mic...usually. I'm a TV reporter and they never seem to stay at the top of the mic. I always end up using my thumb to prop it up there. I made a flag at home just for fun out of a plastic swiss army watch box. Took me about 10 minutes to rip the lid off and drill it. Then I made my own logos on the computer and essentially laminated them to the flag with clear packing tape.
   You must have a plastic box laying around!! Have fun...they're great for news parodies...yes we make them too. What else do you think we show at the X-mas party.
   
   Brian bntspok@aol.com

   Posted 8 years ago #

5. browner
   Member

   
   http://www.markertek.com/MTStore/product.CFM?BaseItem=MF%2DBW

   Posted 8 years ago #

RSS feed for this topic

youtube, myvideo, funnyordie, gametrailers, collegehumor, dailymotion, glumbert, liveleak, redtube, googlevideo, sevenload, metacafe, clipfish, vimeo