echo

1. nobody
   Member

   
   hey all
   Here's on I havn't run across yet.
   I shoot with a PD 150. Very low hours on it as of right now.
   I shoot mainly in doors with lowel Totas with white umbrellas.
   I did a shoot over the weekend and I am seeing small amounts of solid RED outlines on certain elements within the shoot.
   I was told by a friend that may be called ECHOING within the cam.
   I am finding though that if the lights are further away from the subject, the red is either eliminated or greatly reduced.
   Problem is also, that it is not visible with the on board LCD screen, only after play back did I notice it. Practically ruining the shoot.
   
   Any ideas?
   D.

   Posted 8 years ago #

2. nobody
   Member

   
   I don't know a better solution than moving the lights. But you could try setting up a CRT moniter (if your camera is capable) and see if you can see it on that while you shoot. You said you can only see it during playback, is that one the LCD or a regular moniter or both? If you've only looked on the LCD, try playing it back on a TV (or CRT computer moniter), and see if it's still there.
   
   Sorry I can't help much. :(

   Posted 8 years ago #

RSS feed for this topic

youtube, myvideo, funnyordie, gametrailers, collegehumor, dailymotion, glumbert, liveleak, redtube, googlevideo, sevenload, metacafe, clipfish, vimeo