http://www.videomaker.com/community/forums/ Videomaker Community Forums » Topic: Pinnacle 710-USB capture Device & Sony Video Capture 6.0 Problem en Sun, 19 Feb 2012 07:34:46 +0000 http://www.videomaker.com/community/forums/topic/pinnacle-710-usb-capture-device-038-sony-video-capture-60-problem#post-59610 Mon, 14 Jun 2010 03:23:39 +0000 ephraimrothschild 59610@http://www.videomaker.com/community/forums/ <p>the only time that you would need to capture something, is when it is using firewire. the exception is pinnacle's capture devices. I am not sure of the reason that it even shows up in sony vegas, but I wouldn't expect it to work. I would just try capturing it in pinnacle, and then importing it into vegas.</p> http://www.videomaker.com/community/forums/topic/pinnacle-710-usb-capture-device-038-sony-video-capture-60-problem#post-56604 Sun, 21 Mar 2010 00:36:05 +0000 daryldrj 56604@http://www.videomaker.com/community/forums/ <p>Sorry Guys I have Sony Vegas and capture 6 but I use a fire wire I cannot replicate your problems to see what might be going on. There are just some thing that are not compatible. I have two Sony cameras and the work just fine in capture, I also have a little hand held Panasonic camera and Sony capture will not recognize it why I do not know I have tried everything and it does not work, so I take the tape from the Panasonic  put it in my FX1 and  download to the comp. </p> http://www.videomaker.com/community/forums/topic/pinnacle-710-usb-capture-device-038-sony-video-capture-60-problem#post-56590 Sat, 20 Mar 2010 09:09:41 +0000 Road Runner 56590@http://www.videomaker.com/community/forums/ <p> Never got any response.</p> http://www.videomaker.com/community/forums/topic/pinnacle-710-usb-capture-device-038-sony-video-capture-60-problem#post-51557 Thu, 22 Oct 2009 08:46:27 +0000 cyorkgo 51557@http://www.videomaker.com/community/forums/ <p> Did you ever find a solution to this problem? I have the DV170 and it is doing the same thing. I went to Frys and purchased a Diamond VC600 and still get hte same problem.</p> <p>Thanks in advance -</p> http://www.videomaker.com/community/forums/topic/pinnacle-710-usb-capture-device-038-sony-video-capture-60-problem#post-49417 Thu, 23 Jul 2009 13:43:12 +0000 Road Runner 49417@http://www.videomaker.com/community/forums/ <p>I have been a Pinnacle user for a few years, and have a Sony Vegas Platinum 9 and  the Sony Video Capture 6.0 installed now.  When I start the Sony Video Capture 6.0 program and select  the Pinnacle 710-USB on the drop down tab for Video, I get an error message, </p> <p> </p> <p>"The device 'Pinnacle 710-USB could not be opened.   Make sure it is turned on and not being used by another application or user'</p> <p> </p> <p>Has any one had this problem and found a work around?</p>