http://www.videomaker.com/community/forums/ Videomaker Community Forums » Tag: beachtek - Recent Posts en Thu, 16 Feb 2012 17:49:50 +0000 http://www.videomaker.com/community/forums/topic/xlr-to-12-cable-vs-beachtek-adapter#post-70812 Wed, 07 Sep 2011 17:24:09 +0000 Phillip 70812@http://www.videomaker.com/community/forums/ <p>Yeah I'm just referring to real quick on the the go shooting. I'd use external recording for productions. I've heard a couple sound tests and it doesn't sound bad. Thanks for your input.</p> http://www.videomaker.com/community/forums/topic/xlr-to-12-cable-vs-beachtek-adapter#post-70797 Wed, 07 Sep 2011 10:05:54 +0000 lmenningen 70797@http://www.videomaker.com/community/forums/ <p>&nbsp;You didn't give enough information - those boxes such as Beachtek are not simply changing connector types, there is a lot more going on than having the right connector. Those boxes often do things like level changing (say, from line level to mic level), impedance matching, converting balanced outputs to unbalanced inputs, etc. Some of them will use batteries which assists the phantom power issue, but many are entirely passive.</p> <p>Many powered mic's are for balanced inputs whereas most 1/8" camera inputs are unbalanced stereo. An&nbsp;XLR to 1/8" adapter&nbsp;may provide a mono-only output but there are Y-type cables that would allow two XLR mic's to feed a single 1/8" stereo camera input. If that is all you need accomplished then yes, an adapter should suffice.</p> http://www.videomaker.com/community/forums/topic/xlr-to-12-cable-vs-beachtek-adapter#post-70768 Tue, 06 Sep 2011 15:15:53 +0000 Phillip 70768@http://www.videomaker.com/community/forums/ <p>I shot with a DSLR and I have been looking into getting an xlr adapter box such as the one made by Beachtek so I can use xlr mics. After thinking, I was wonder what the difference would be if I just bought an xlr to 1/8 (1/8 goes into my dslr) cable as long as my mic is powered? Thats $10 vs $300...am I missing something here?</p> http://www.videomaker.com/community/forums/topic/new-canon-hf-s21-what-do-i-need-now#post-70327 Fri, 19 Aug 2011 21:50:35 +0000 John Tate 70327@http://www.videomaker.com/community/forums/ <p>The HF 21 doesnt have a XLR port but it does have a aux port for external mics. You can buy a hot shoe adapter on amazon so non canon accessories will fit in the shoe. The Rode mics are great. </p> <p>&nbsp;</p> <p>I have a stero RodePro mic, and a small LED light attach to a L bracket which screws in at the bottom of my cam.</p> http://www.videomaker.com/community/forums/topic/new-canon-hf-s21-what-do-i-need-now#post-64669 Fri, 07 Jan 2011 11:54:46 +0000 XTR-91 64669@http://www.videomaker.com/community/forums/ <p>Get the juicedlink over the beachtek.</p> <p> </p> <p>If you're shooting in the dark, you might need a light.</p> http://www.videomaker.com/community/forums/topic/new-canon-hf-s21-what-do-i-need-now#post-64666 Fri, 07 Jan 2011 10:41:47 +0000 hmueller 64666@http://www.videomaker.com/community/forums/ <p>Hi Chris</p> <p>I recently purchased a Canon HF S21. I would not worry about the new model that they have announced this week but that we won't see until later in the year, the HF S21 is plenty good enough. The main advantage of the new model is the large focus ring. It still uses that same mini hotshoe as the S21</p> <p>The mini hotshoe is a limiting factor. I have purchased a flash bracket that mounts underneath the camera and that allows me to use standard shotgun and wireless mics.</p> <p>Because of the larger lens, there are many more filters and wide angle/telephoto adaptors available.</p> <p>Heidi</p> http://www.videomaker.com/community/forums/topic/new-canon-hf-s21-what-do-i-need-now#post-64664 Fri, 07 Jan 2011 08:48:29 +0000 peachydingo 64664@http://www.videomaker.com/community/forums/ <p>Hi,</p> <p>Just got my new HF S21 in the mail Monday- of course they just announced a new recorder that looks even better, but who cares. This thing shoots sharp as a tack.</p> <p>The mini hot shoe is an issue for me- how do i mount my lights, externtal mics, etc? Do I have to buy all Canon supplied to fit that shoe? How about adding external XLR mics- do i need a Beachtek or something like it?</p> <p>Has anyone used one of those handles from Opteka? How about a wide angle attachment?</p> <p>I also want an underwater video case, underwater lights, and either HMI or flourescent studio lights for interviews.</p> <p>Tell me what you've bought, and what works. Especially with frame rates.</p> <p> </p> <p>Thanks.</p> <p> </p> <p>Chris</p> http://www.videomaker.com/community/forums/topic/beachtek-dxa-8-camcorder-xlr-adapter-dont-mind-the-other-listing#post-45746 Sun, 12 Apr 2009 07:53:07 +0000 Pis4PIR8 45746@http://www.videomaker.com/community/forums/ <p>You can make an offer here, or at the link provided below:</p> <p><strong><a href="http://cgi.ebay.com/BeachTek-DXA-8-XLR-Adapter-juicedlink-sign-video-BIN_W0QQitemZ140313780323QQcmdZViewItemQQptZLH_Def" rel="nofollow">http://cgi.ebay.com/BeachTek-DXA-8-XLR-Adapter-juicedlink-sign-video-BIN_W0QQitemZ140313780323QQcmdZViewItemQQptZLH_Def</a><br /> </strong></p> <p>Happy Bidding!</p> http://www.videomaker.com/community/forums/topic/beachtek-dxa-8-camcorder-xlr-adapter-dont-mind-the-other-listing#post-45428 Tue, 31 Mar 2009 16:06:13 +0000 Pis4PIR8 45428@http://www.videomaker.com/community/forums/ <p><img src="http://pics.ebaystatic.com/aw/pics/s.gif" /><img src="http://pics.ebaystatic.com/aw/pics/s.gif" /> <a href="http://farm4.static.flickr.com/3476/3369913421_8154c3c711.jpg?v=0">http://farm4.static.flickr.com/3476...4c3c711.jpg?v=0</a></p> <p> Hello all and welcome!  Up for sale is a BeachTek DXA-8 Camcorder XLR Adapter!  This was bought brand new by me from TriState Camera for $359.99 a  little over a month ago. It has never been used, just taken out of its packaging to check its functionality...and I must say that this thing sounds great! I bought this camcorder xlr adapter thinking that I would get a lot of use out of it for freelance gigs, but honestly it has just been sitting around due to my having just moved recently and getting caught up in other things as well. I'd much rather sell this to someone who could make more use of it than I have.<br /> <strong><br /> FEATURES:</strong></p> <p> <a href="http://farm4.static.flickr.com/3587/3370792528_714fac3c71.jpg?v=0">http://farm4.static.flickr.com/3587...fac3c71.jpg?v=0</a></p> <p> The <strong>DXA-8</strong> Dual XLR adapter offers two true microphone preamps with 48 Volt phantom power and switchable peak limiting level control on both inputs, for use with professional condenser microphones.</p> <p> The <strong>DXA-8</strong> is universally compatible with most camcorders, and is particularly useful in conjunction with the Canon GL2 and the Sony VX 2100, as it provides manual audio level control superior to that offered by those cameras. It also functions quite well as a portable, affordable microphone preamp solution, for use in professional location recording to DAT, Minidisc, Compact Flash and SmartMedia, and other portable digital recorders. </p> <p> Two sources may be recorded simultaneously, and each input may be recorded on a separate audio track, making it possible to mix both channels individually during editing. The <strong>DXA-8</strong> provides channel separation adequate for recording timecode and audio simultaneously and the shielded, transformer balanced inputs and outputs, and the XLR connectors, are of a professional quality.</p> <p> <a href="http://farm4.static.flickr.com/3472/3370733640_c4b0a23b36.jpg?v=0">http://farm4.static.flickr.com/3472...0a23b36.jpg?v=0</a></p> <p> * XLR Inputs are true Microphone Preamps for use with Video Cameras or Portable Audio Recorders </p> <p>* Input channels allow recording of two sources on separate tracks for post audio mixing; both channels have a dedicated Mic/Line level switch and trim potentiometers for separate level control </p> <p>* 48 Volt phantom power and peak limiting level control on both channels for use with professional Condenser Mics </p> <p> * Transformer Isolated Inputs and Outputs for clean, RF-Free Sound </p> <p>* Auxiliary Mini-Jack on right channel for wireless Mics </p> <p>* Dual MIC/LINE level switches for connection of Mics or CD and Cassette players and other line level sources </p> <p>* Mono/Stereo Switch for single input recording </p> <p> <a href="http://farm4.static.flickr.com/3428/3369913069_e1c712cabd.jpg?v=0">http://farm4.static.flickr.com/3428...712cabd.jpg?v=0</a></p> <p> <a href="http://farm4.static.flickr.com/3472/3369913179_50787b0113.jpg?v=0">http://farm4.static.flickr.com/3472...87b0113.jpg?v=0</a></p> <p> <a href="http://farm4.static.flickr.com/3550/3370735930_cee6c6022f.jpg?v=0">http://farm4.static.flickr.com/3550...6c6022f.jpg?v=0</a></p> <p> * Standard 9 Volt battery powering </p> <p> <a href="http://farm4.static.flickr.com/3664/3370733716_d5e13509bd.jpg?v=0">http://farm4.static.flickr.com/3664...13509bd.jpg?v=0</a></p> <p>* LED battery power Indicator </p> <p> </p> <p> <strong>SPECIFICATIONS:</strong></p> <p> Input Connections:<br /> Two XLR female connectors, one auxiliary mini-jack for right input </p> <p> Output Connectors:<br /> Stereo right angle mini-plug on 10" cable </p> <p> Gain:<br /> Adjustable from -10 to +15 dB </p> <p> Maximum Input Voltage:<br /> Not Applicable (<em>Note: See Pre-Clipping Input Level spec below</em>) </p> <p> Frequency Response:<br /> 20 Hz - 20 kHz, +/-3 dB (Limiter On) </p> <p> Attenuation / Gain:<br /> No (<em> Note: All Inputs at Mic Level</em><em>) </em> <em> </em></p> <p><em> Pre-Clipping Input Level: <br /> +1.5 dBu(minimum gain with Limiter on)<br /> -27 dBu(maximum gain with Limiter on) </em> <em> </em></p> <p><em> Maximum Output Level: <br /> -30 dBu (limiter off)<br /> -36 dBu (limiter on) </em> <em> </em></p> <p><em> Phantom Power: <br /> Dual Regulated 48 volt power supplies Current to 14mA (direct short) </em> <em> </em></p> <p><em> Battery: <br /> One standard 9 volt alkaline battery <br /> LED battery indicator, 10 hrs. typical without phantom power </em> <em> </em></p> <p><em> Dimensions: <br /> 5.25 x 3.5 x 1.25" </em> <em> </em></p> <p><em> Weight: <br /> 1 lb </em></p> <p> <a href="http://farm4.static.flickr.com/3634/3370735180_eb22abfb5a.jpg?v=0">http://farm4.static.flickr.com/3634...2abfb5a.jpg?v=0</a></p> <p> <a href="http://farm4.static.flickr.com/3466/3370735466_52b8ac05d1.jpg?v=0">http://farm4.static.flickr.com/3466...8ac05d1.jpg?v=0</a></p> <p> <a href="http://farm4.static.flickr.com/3620/3370735668_1151f64958.jpg?v=0">http://farm4.static.flickr.com/3620...1f64958.jpg?v=0</a></p> <p> <a href="http://farm4.static.flickr.com/3564/3370734930_1e86dbe89b.jpg?v=0">http://farm4.static.flickr.com/3564...6dbe89b.jpg?v=0</a></p> <p> </p> <p> <strong>The the original user manual and packaging are included in this sale.</strong></p> <p><em><strong>This BeachTek DXA-8 retails for $399.  It is a discontinued model and is a very rare find.  All offers are welcome!  So throw me an offer now!</strong></em></p> http://www.videomaker.com/community/forums/topic/suggestions-for-wired-handheld-with-beachtek-adapter#post-42546 Fri, 26 Dec 2008 06:16:55 +0000 futball8 42546@http://www.videomaker.com/community/forums/ <p>I'm hoping to spend less than $100.00, and yes, a handheld for sportscaster type interviews with coaches and players.</p> http://www.videomaker.com/community/forums/topic/suggestions-for-wired-handheld-with-beachtek-adapter#post-42498 Tue, 23 Dec 2008 20:05:50 +0000 robGRAUERT 42498@http://www.videomaker.com/community/forums/ <p> I don't have experience with BeachTek adapters but I can tell you I've never heard anything bad about them. </p> <p> What price range are you looking at for a mic? And what kind of make are you looking for? Another handheld? I was always under the impression that those aren't "wired" in the same sense a lavalier mic may be. You just connect an XLR cable to them. </p> http://www.videomaker.com/community/forums/topic/suggestions-for-wired-handheld-with-beachtek-adapter#post-42486 Tue, 23 Dec 2008 13:33:47 +0000 futball8 42486@http://www.videomaker.com/community/forums/ <p>Hi all,</p> <p> I just purchased a Canon FS100 camcorder and a Beachtek DXA-2s XLR adapter to go with it. I have a cheap Peavey PVi100 mic I'm using right now, and I'm not really happy with the results. Does anyone have experience with this Beachtek adapter and a good wired mic to go with it? Thanks in advance!</p> http://www.videomaker.com/community/forums/topic/so-my-beachtek-is-broken#post-38436 Thu, 17 Jul 2008 09:29:53 +0000 ralck 38436@http://www.videomaker.com/community/forums/ <p>Well, as the title says, my Beachtek DXA-4 adapter isn't working the way it should.  The right XLR plug isn't working.  I opened it up just enough to see what looks like one of the wires connected to it came un-soldered.  My problem is, there is a ton of glue holding the top plate onto an inside plate which makes it impossible to just pull off.</p> <p>Has anyone opened up their Beachtek adapter and if so, how did you pry off the glue?  Even though I only use 1 mic (Rode NTG-2) can anyone give me a good reason to consider the Beachtek completely broken so I have an excuse to get a JuicedLink :-P?  I wish I knew about JuicedLink before I bought this... as it looks like their boxes are much better...</p> http://www.videomaker.com/community/forums/topic/for-sale-sony-vx2100-libec-tripod-beachtek-more#post-36244 Tue, 29 Apr 2008 17:34:29 +0000 kladkym 36244@http://www.videomaker.com/community/forums/ <p>Sold; pending payment</p> http://www.videomaker.com/community/forums/topic/for-sale-sony-vx2100-libec-tripod-beachtek-more#post-36210 Sun, 27 Apr 2008 19:17:43 +0000 kladkym 36210@http://www.videomaker.com/community/forums/ <p>Sony VX2100. Less than 100 hours on it. Great shape, this has been babied!<br /> It comes with a Beachtek DXA-6 XLR - Phantom Power, XLR - 1/8 line/mike stereo,<br /> Libec TH-M20 tripod and fluid head,<br /> Sony 3 watt light that runs off of the on board battery,<br /> U-Flycam Steadycam Stabilzer,<br /> Original box,<br /> Tamrac 612 Camera Bag,<br /> Tiffen UV protector filter,<br /> Cinetactics Matteblox DV System,<br /> Users Manual and Service Manual on CD<br /> battery, cables, charger.</p> <p>All in Great shape!!</p> <p>I'm asking $1850 + insured shipping</p> <p>Please email at <a href="mailto:kladkym@gmail.com">kladkym@gmail.com</a> if you are interested, want pictures or have any questions.</p> http://www.videomaker.com/community/forums/topic/sony-hdr-fx1-audio-help#post-35606 Thu, 20 Mar 2008 19:44:39 +0000 adobelover 35606@http://www.videomaker.com/community/forums/ <p>Hello,</p> <p>New to this forum and I hope someone here can give me some information and some help on what I am tring to do.</p> <p>I have been asked to video a beauty pageant at our local auditorium and create a DVD of it. I have no issues with the video itself.  I have done video in this place many times.  My problem has always been audio.  The last time I did a video I used a beachtek device tied to my camera.  The beahtek device was plugged into the back of the soundboard(mackie) into the left and right main out jacks (could be the left and right aux sends, can't remember because I haven't done this in a while).  I was told to try the tape out, but if I remember correctly, the last time I tried that the audio wasn't real clear, but that could have been my fault, because I went straight into the camera mic jack from the tape out.  The sound I get is great when they are speaking, but if someone sings, it doesn't sound to great, it almost sounds flat, no mix of music and voice.  I thought about taking a second camera and using it to record the sound and pulling the singing parts from that camera. </p> <p>Is there a better way of getting a good mix of speaking and singing? Will a digital recorder work better and if so, what kind?</p> <p>I have a Sony HDR-FX1 camera.  I also have a beachtek DXA-4.  The mackie box is pretty old, it has been in the auditorium now since probably 2000.  It is a 24 line.  I am not sure what the model number is, but if needed I will see if I can get it.</p> <p>Thanks for any suggestions.</p>