You are here

Mitra 3D Mic Indie

Mitra-3D-Mic-Indie

Mitra 3D Mic Indie is a low budget solution for these independent low budget movie producers.

Making good quality films has always been a challenge for low budget independent video makers. In the absence of specialized video making equipment, amateurs have to sacrifice the quality of the film. Mitra 3D Mic Indie is a low budget solution for these independent low budget movie producers. The 3D Mic Indie records the sound in such a manner that when played, it recreates the original three-dimensional sound effect.

Features

Mitra has incorporated the 3D Mic Indie with their patent pending SHEM (Simplified Human Ear Model) technology. The ear responds better to certain frequencies as compared to others. Using this technique, the device records the sound similar to the way a human ear perceives it. The result is a sound that makes the user feel like being part of the action, giving a 3D experience. The output device may be a couple of speakers, headphones or ear-buds.

The 3D Mic Pro can be connected to any audio/video recording device, DSLR or video camera via the two XLR sockets provided. The electronics of the device have been designed to produce a signal that is less susceptible to loses. This allows the use of long cables without having to worry about signal interference or buzzing in sound.

The device is light and portable. Two 9 volt alkaline batteries serve as the power source, which can run the device for up to 12 hours. There is no need for any power cable. Two battery power level lights are provided to indicate the health of the batteries.

For added versatility, the 3D Mic Indie can be mounted to boom poles and speaker stands. Windscreens are also available to prevent interference of wind noise with the recording.

Technical Specifications

Directional Pattern: Very similar to the human ear
Principle of Operation: Pressure transducer with patent pending SHEM technology
Cartridge Type: Back plate pre-polarized condenser capsule
Frequency Range: 20Hz to 20kHz
Sensitivity ±4dB at 1kHz: -35dB (0db = 1V/pa)
Signal to Noise Ratio: >62dB
Output Impedance: 50 ohms balanced, < 200 ohms unbalanced
Cable Drive Capability: 487' (150 m)
Phone Line out max. signal voltage: < 200 ohms
Cable Drive Capability: 487 ft (150 m)
Output Balance Principle: Impedance Balancing with Active Drive
Power Supply: 2 x 9V PP3 Battery
Current Consumption: 2 x 25mA
Connector: XLR-3M; Pin 1:shield, Pin 2:signal+phase, Pin 3: - phase
Color: Matte Black
Microphone hand grip diameter: 60 mm
Microphone length: 7.8 in (198 mm)
Weight (without Batteries): 1.4 lb (625 g)
Height: 7.5 in (190 mm)
Width: 12 in (305 mm)
Tripod Hole: 1/4 in 20 pitch

Price: $695

Mitra
www.3dmicpro.com

Tags:  October 2012
Ahsan
Mazhar
Fri, 10/05/2012 - 8:00am