Video Editing: What is Multicam Editing?

Morgan Paar
July 2007

» Next Image Previous Image «

If you shoot the same event/scene with more than one camera and try to edit the multiple cameras' footage together, you are multicam editing. Soap operas, reality TV, concert/theater videos and weddings often utilize multicam editing. Spike Lee used up to fifteen cameras in various scenes in Bamboozled (2000).

With Apple's Final Cut Pro, you can edit together up to 128 camera angles at once (do you own 128 cameras?). You can do a po' man's multicam edit without the "multicam" function, but it gets more difficult as you add more than two feeds. If you regularly work with more than one camera, you'll b e happy these programmers came up with multicam editing.

The multicam shooting article in this issue covers most of the production side of the multicam process but I'm going to quickly cover the aspects of shooting that relate to the multicam edit.

The easiest time you could have in the edit bay is when your crew shoots with all of their cameras using synchronized timecode. Known as Jam Syncing, this writes the same timecode to each camcorder. You would need higher-end cameras, such as the Canon XL H1, which have a timecode in/out connector.

The next best method is to have a sound and/or visual sync point. Clapboards will give you both a visual and an audible single-frame reference for syncing multiple clips. Otherwise, have someone clap hands in view of all the cameras as they are rolling, for a visual and audible point.

Next best, though only visual, is a still camera flash. If your crew forgets to tape a sync point, good luck finding one. If it's a wedding or Bar/Bat Mitzvah, there is a good chance you could use the flash from someone else's camera. Otherwise, you'll have to get creative with a visual and/or audible cue that all cameras have recorded.

One other strong suggestion: if you are not Jam Syncing, do not stop recording from any of the cameras until the tape or the event is finished. Otherwise, you will need to re-sync after every point where the camera was turned off.

One last production consideration which will have great consequences in the edit bay: most of the higher-end programs ($500 and up) that will allow you to mulitcam edit will require you to have all of your cameras recording the same codec, image dimensions and frame rate. If all of your cameras are the same make and model and set up the same way, you should be all right. Avid Xpress Pro claims to be the only consumer program on the market that allows "mixed resolution clip groups" with no transcoding required.

With your project correctly shot, it's time to get down to the business of editing all these "feeds." Multicam editing is not intuitive, at least in the set-up. You may need to perform a task that ranks up there with getting dental work done or filing taxes: reading your software's instruction manual. Each program handles a multicam edit a bit differently, so read up. Multicam editing is also extremely CPU intensive, so if you anticipate using the multicam option often, make sure you are using a powerful computer.

Capturing is usually the same process you are used to. One difference is that some programs will let you enter the angle number/name upon capture for easier organization. You can also add angle numbers after capture in most programs, so it is not necessary at the capture stage.

Log and capture your footage, and bring the clips into your editing program. Here is where you need to detour from your usual workflow. With your clips imported into your editing program, you will now need to group your clips into what some programs call a 'Multiclip' or nest your clips into a new sequence and enable them for multicam. If you jam synced your source footage, you can sync your clips by timecode. Otherwise, you will need to find a frame to sync to as described above.

With your group of clips combined into "one multiclip," double-click on your new clip and see your grouped shots appear in your viewer window. Hit the play button and watch all of your clips play back simultaneously and in sync. With most of these programs, you can use your playhead to scrub through your multiclip, as well as your J, K and L keys to navigate through the clips.

You are able to insert new angles or delete angles from your multiclip after this process. You can also change the order of the clips in your viewer window. In most programs, you can also display individual camera information for each clip, such as timecode and angle number/name, as an overlay.

• Digg This!
• del.icio.us
• Technorati
• StumbleUpon
• Reddit